The (510) E-Cigarette consists of a power supply
with a manual switch (battery), atomization chamber, and a cartridge.
The cartridge is suited for one time use only but most people re-fill
them with success. New cartridges will always work the best. We recommend
keeping a good stock of them handy. When you push the manual switch
the 510 will be activated.
Unpack the cartridge and remove the cover. Click the cartridge in the
atomizer. Screw a power supply on the atomizer. Your 510 is now ready
for use. Push the manual button for no longer than 5 seconds to avoid
overheating of the atomizer. Do not use the 510 E-Cigarette in a vertical position, since liquid could leak. In case the
510 should vaporize continuously or in case the 510 shows signs of over
heating, stop the usage, unscrew all parts and
The 510 E-Cigarette power supply needs to be
recharged when the unit produces no more vapor.
If during the use of this unit, vapor is found to be significantly
reduced, the cartridge needs to be replaced.
The 510 E-Cigarette does not cause harm to
surrounding people and environment. We recommend however out of courtesy
to ask for permission to use the vaporizing function in public places,
beforehand. The atomizer does not need to be cleaned with water.
However, if you should encounter persisting mal performance you can try
to rinse the atomizer with water and by blowing the water through the
atomizer several times. The atomizer should be dried with a hairdryer
after this process. When the atomizer is fully dry, insert a new
cartridge, place the unit vertically and let the liquid penetrate the
atomizer for a few minutes. It helps to drop a small amount of liquid
directly onto the atomizer to kick start it in case the atomizer is
still too dry.
POWER SUPPLY LIFE
510 E-Cigarette power supply function for max 200
to 250 puffs per charge. The Power supply can be charged and used 200
times. After more than 200 charging and usage cycles, their functioning
span lessens significantly.
Screw the dedicated Power supply in the charger. Connect the charger
to the power outlet. 1. The first charge should be kept for 8 hours,
even if the LED light turns green. 2. Use for 20 minutes. 3. Charge the
Power supply for another 1 hour. Your Power supply is now ready for
normal use. Normal charging time should be kept for 1 hour (even if the
LED light turns green). Do not use the charger in damp areas. Do not
charge the Power supply near a high-temp heat source. Do not weld or
pierce the Power supply. If the Power supply is found to be emitting any
odor or heat or be discolored or deformed or have any abnormally during
charging, please cut off the power source immediately and remove the
Power supply from the 510 body or charger and suspend the use of it. The
510 charger can only be used with the 510 dedicated Power supply. Do
not try to use this charger to charge other kinds of Power supply.
Please keep the 510 and it’s components and cartridges from the reach of
children or animals.
Optional USB Charger:
Screw the dedicated Power supply in the optional USB charger cable.
Insert the USB charger cable into the USB port of your computer, USB
Home Charger, USB car charger. Do not charge Power supply outdoors or in
a damp environment. Keep all parts out of children’s reach.
The body is an integrated stainless steel shell structure, containing
a Power supply, a manual switch, an atomization chamber and a
We do not accept any warranty/indemnity claims in case of wrong
usage. If you are carrying the 510 with you, please carry it separately
in order to avoid scratches or damage due to collision with other parts
such as keys or mobile phones. The use of any un-dedicated components
will lead to malfunction and damage of this product. The use of other
than 510 E-Cigarette cartridges or the use of some
liquids can damage the atomizer beyond repair. Please dispose of old
Power supply in your local Power supply recycling collection point. When
driving, please ensure your strict compliance with the relevant laws
and regulations of the country or region where you are staying. Be
concentrated on driving and pay attention to road conditions. Do not use
this device while driving and secure all parts to avoid damage to the
product caused by collision. The 510 uses an advanced microelectronic
technology to vaporize a special designed GRAS (generally recommended as
safe) approved liquid that is contained in cartridges that are inserted
into an atomizer.
Storage: The 510 E-Cigarette and its supporting
parts should be kept away from children’s reach and stored safely in a
non-damp environment.E-Cigarettes are ADULT DEVICES and are never to be
left where anyone under the age of 19 can reach them. They also NOT be
marketed as a “healthy” or smoking cessation device.
Preparation: Leave the atomizer without cartridge to dry for the
night by storing the atomizer vertically on a paper tissue or dry rack.
Charge your Power supply at night.
Maintenance: The 510 should be maintained regularly.
Clean the screws threads of the different parts such as atomizer,
chargers and Power supply with a tissue dipped in purified un-perfumed
alcohol (please refer to your local drugstore). Clean screw thread will
provide better electric conduction. Blow into the atomizer once and a
while to evacuate left over liquid. Remove cartridge at night. Put the
atomizer to dry for the night on a dry rack. When the vapor diminishes
significantly the Power supply needs to be charged.
Power supply and charger: The 510 E-Cigarette is
powered by a 3.7 V special Power supply. The charger is specially
adapted for 510 Power supply. The input voltage of the USB home charger
is AC100V-240V 50/60Hz. The input voltage of the USB car charger is
DC12V-24V. The input voltage of the USB Power supply computer charger is
DC5V. Pay attention to the value of the local voltage to be in
accordance to that of the 510 charger.